Skip to content

Flooring / Laying and care

Laying, finishing and caring for your beech floor

  1. 1Lay
  2. 2Sand
  3. 3Coat

Lay, sand, coat

We supply the boards uncoated. Your installer lays, sands and finishes them.

  • When they arrive: store them flat, dry and off the ground. Check them against your order, and send us photos of any you’re unsure about before laying.
  • Concrete slab? See BRANZ’s guidance on solid timber flooring on a slab.
  • Underfloor heating: check with your heating installer first.
  • Kitchens and bathrooms: not a waterproof floor. Not for wet bathrooms.
  • Pinholes in Heritage grade: supplied unfilled. More about pinholes.

Installers: the data sheet has the board details, or email hello@innatefurniture.co.nz.

Choosing a finish

We like natural oils such as Osmo and Natural House Company. Follow the maker’s instructions for whatever you use.

Beech floorboards in three finishes side by side: natural honey-brown, walnut mid-brown and blackwash grey, with knots showing
Beech flooring in natural, walnut and blackwash.

Care

  • Sweep or vacuum regularly.
  • Wipe with a damp, not wet, mop. Don’t leave water sitting on the floor.
  • Wipe up spills promptly, especially in the kitchen.
  • Use the cleaner your finish maker recommends.
  • Felt pads under furniture legs, and lift rather than drag.
  • Fine gaps in dry months are normal.
  • Re-oil as your finish maker recommends. A solid floor can be sanded and refinished while there’s enough timber above the tongue.

Questions? Email hello@innatefurniture.co.nz or call 027 350 2083.

See the flooringFree sample pair